REDARC 12V DC 200A Dual Battery Isolator for Extremely Heavy Duty Operations

Contains : 1x REDARC 12V 200A Dual Battery Isolator

Specifications:

Input (Operating) Voltage : 12VDC
Output Current Rating (Cont.) : 200A
Input Fuse Rating : 200A
Output Fuse Rating : 200A
Length (mm) : 100
Width (mm) : 95
Height (mm) : 90
Weight (kg) : 0.6
Type Approval : CE
Warranty : 2 Years

Features

• Overmould design
• Compact in size and easy to install
• Silver contacts for longer life and suitable for marine applications
• Power saving technology
• Fault indication
• Fully surge protected

Product Description

This is a battery isolator used as a solenoid priority system to protect that start battery from excessive discharge while the auxiliary battery is supplying non-essential loads.It provides 12 volt DC incorporating 200A of continuous ratings, the battery isolator is designed for extremely heavy-duty operations.

Power Saving Technology

Primarily used in commercial vehicle dual battery systems, it incorporates electronic components that will prevent the solenoid from generating high voltage transients. It is better than a diode battery isolator due to the voltage drop associated with diode type isolation. It features a low standby current draw and sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop and excessive current draw conditions.

The Smart Start SBI battery isolator is a safe way to charge dual battery system and should often be installed with a high quality fuse kit.

About Redarc

REDARC has over 40 years' experience in the research, design, development and manufacture of a range of electronic voltage converters and associated products including inverters, power supplies, battery chargers, brake controllers and trailer braking products.

REDARC are committed to supplying the highest quality products to customers, which is supported through a strong commitment to continuous product improvement and new product development.With over 250 years combined experience in our engineering department, a purpose-built design and manufacturing facility and a hand-picked production team, REDARC has the capability to conceptualise, design, test and manufacture products from smart relays to complex load sensors.

All REDARC products are tested for electromagnetic compatibility (EMC). Our testing equipment has been specifically designed to ensure that all of our products meet the standards required by our most demanding customers.Every REDARC product is tested before it leaves the facility.