2" 3" 4" Lift Kit Diff Drop Kit Direct Bolt In for Toyota Hilux N80 GGN 15-On

Contents : 1x 4X4FORCE Diff Drop Kit

Suits :

Toyota Land Cruiser Prado 150 Series 2009-On

(Note:Only Suits Lifted Vehicles)

Descriptions

Diff Drop Kits are designed to be fitted when 2 inch or bigger lifts are performed.This kit is 100% Bolt in, No Fabrication Required.When raising your Hilux over 50mm,a Diff Drop kit Must be have.

Drop the Diff 30mm and improves the drivers side weak link by reinforcing the drivers side diff mounting bracket and mounting it to the rear crossmember as well as the front cross member, adding more strength over the standard setup.

When lifting IFS Vehicles, the Constant Velocity (CV) joints are put on an increased angle. This increased angle of the CV joint during operation can accelerate the wear on the joint, as well as putting additional stress on the CV boots leading to splitting and eventually premature failure of the CV. This wear is accelerated furtherif larger (wider) wheels and tyres are fitted.

The IFS Diff Drop Kits are application specific and supplied complete to get the job done. The bolt on kit corrects the geometry on the front driveshaft and CV's, lowering the front diff by approx. 30mm, thus reducing the angles the CV joints need to operate on, and avoiding the expensive replacements of CV's and boots. Allows the bash plate to be refitted.